Rodeo Sport 2WD L4-2.2L (2002)
9. Disconnect the harness connector for the resin top (Left side, behind the luggage side trim).
-
Remove the canopy cover (1), the luggage side lid (2) and luggage side upper cover (3). Then pull out the harness and disconnect the
connector.
10. Remove the resin top assembly.
-
Remove the two fixing bolts and nut from the left and right sides. Lift the resin top and remove.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Removing and mounting the resin top should always be performed by two persons.
2. Tighten the resin top fixing bolts and nuts to the specified torque.
Torque: 15 N.m (11 lb ft)