Rodeo Sport 2WD L4-2.2L (2002)
7. Install drive plate bolt by using drive plate holder J-33939 (1) to prevent the drive plate from rotating.
-
Tighten the drive plate bolt to the specified torque.
Torque: 13 N.m (113 lb in)
-
After tightening the drive plate bolt, check to be sure the pulley rotates smoothly.
-
Check to be sure that the clutch clearance is between 0.3 - 0.6 mm (0.01 - 0.02 in.)
-
If necessary, install adjusting shim(s).
-
Adjusting shims are available in the following thickness.
Thickness
-
0.1 mm (0.0039 in.)
-
0.3 mm (0.0118 in.)
-
0.5 mm (0.0197 in.)