Rodeo Sport 2WD L4-2.2L (2002)
Oxygen Sensor: Description and Operation
Catalyst Monitor Heated Oxygen Sensors
Three-way catalytic converters are used to control emissions of hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx). The catalyst
within the converters promotes a chemical reaction. This reaction oxidizes the HC and CO present in the exhaust gas and converts them into harmless
water vapor and carbon dioxide. The catalyst also reduces NOx by converting it to nitrogen. The PCM can monitor this process using the Bank 1 HO2S
2 heated oxygen sensor. The Bank 1 HO2S 1 sensor produces an output signal which indicates the amount of oxygen present in the exhaust gas entering
the three-way catalytic converter. The Bank 1 HO2S 2 sensor produces an output signal which indicates the oxygen storage capacity of the catalyst. This
indicates the catalyst's ability to efficiently convert exhaust gases. If the catalyst is operating efficiently, the Bank 1 HO2S 1 signal will be more active
than the signal produced by the Bank 1 HO2S 2 sensor.
The catalyst monitor sensors operate the same as the fuel control sensors. The Bank 1 HO2S 2 sensor's main function is catalyst monitoring, but it also
has a limited role in fuel control. If a sensor output indicates a voltage either above or below the 450 mV bias voltage for an extended period of time, the