Rodeo Sport 2WD L4-2.2L (2002)
Wheel Speed Sensor: Technical Service Bulletins
ABS - Front Wheel Speed Sensor Replacement
TSB SBO3-09-S002
2WD Front Wheel Speed Sensor Replacement
(Service Manual Replacement)
ISSUE DATE: MARCH 2003
Affected Vehicles
^
2002.7-2003 Axiom (UP), 2WD models.
^
2002-2003 Rodeo (UE) and Rodeo Sport (UA), 2WD models.
Service Information
Front wheel speed sensor is now available for individual installation.
NOTE:
If diagnosis leads to replacement of the sensor with related DTC, do not replace the complete hub assembly.
Service Procedure
1.
Diagnose speed sensor according to the Brake Control System section in the Service Manual.
2.
Remove the front hub assembly from the knuckle. Refer to the Front Hub and Disc section of the Service Manual (see figure 1).
3.
Insert J-37228 Seal Cutter between the hub mating surface and remove the speed sensor from the hub (see figure 2).