Rodeo Sport 2WD V6-3.2L (2001)
Applying Grease To Piston Seal & Cylinder Wall
3. Apply special rubber grease to the piston seal and cylinder wall, then insert the piston seal into the cylinder. The special rubber grease is included
in the repair kit.
Inserting Piston Into Cylinder
4. When inserting the piston into the cylinder, use finger pressure only and do not use a mallet or other impact tool, since damage to the cylinder wall
or piston seal can result.
Install piston.
Removing Dust Boot Ring
5. Apply special grease (approximately 1 g) to the piston and attach the dust boot to the piston and caliper. Insert the dust boot ring into the dust
boot.
6. Install guide bolt and lock bolt dust boot.