Rodeo Sport 2WD V6-3.2L (2001)
Brake Rotor/Disc: Testing and Inspection
Front Brake Rotor
Checking Lateral Runout
Checking Lateral Runout
1. Adjust the wheel bearing correctly.
2. Attach a dial indicator accordingly so that the stem contacts the rotor surface to approximately 29 mm (1.14 inch) from the rotor edge.
Checking Lateral Runout
3. Rotate the rotor one complete rotation and inspect for signs of lateral runout.
Lateral runout should not exceed 0.13 mm (0.005 inch).
Maximum runout: 0.13 mm (0.005 inch)
Checking Rotor Parallelism
Parallelism
Parallelism is the measurement of thickness of the rotor at four or more points around the circumference of the rotor. All measurement must be made
at 29 mm (1.14 inch) from the edge of the rotor.
Measuring Thickness Of Rotor
The rotor thickness must not vary more than 0.010 mm (0.0004 inch) from point to point.
Maximum Parallelism: 0.010 mm (0.0004 inch)