Rodeo Sport 2WD V6-3.2L (2001)
Wheel Cylinder: Service and Repair
Disassembly and Assembly
Disassembly
1. Remove boot (1) and piston assembly (2).
2. Remove piston cup (3) from piston assembly (2).
3. Remove return spring (4) and bleeder (5) from wheel cylinder (6).
Inspection and Repair
Make necessary parts replacement if wear, damage, corrosion or any other abnormal condition are fond through inspection.
Check the following parts;
-
Wheel cylinder body
-
Cylinder bore
-
Piston
-
Return spring
-
Bleeder
Note: Replace the piston cups and boots each time the wheel cylinder is overhauled. Discard these used rubber parts and replace with new ones.
Reassembly
Lubricating Cylinder Bore With Rubber Grease
1. Lubricate the cylinder bore with clean rubber grease.