Rodeo Sport 2WD V6-3.2L (2001)
Cruise Control Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the meter cluster assembly (1).
-
Refer to the Instrument Panel Assembly in Body Structure.
3. Remove the cruise control main switch (2).
-
Disconnect the switch connector.
-
To remove the switch, push the lock from the back side of the instrument panel cluster assembly.
INSTALLATION
To install, follow the removal steps in the reverse order.
Cruise Control Switch (Combination Switch)
Refer to Lighting Switch (Combination Switch) in Lighting System.
See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch