Rodeo Sport 2WD V6-3.2L (2001)
2. Install water pump assembly and tighten bolts to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
-
Tightening order
The tightening order are in the illustrate.
Note: To prevent the oil leakage, apply the LOCTITE 262 or an equivalent, to the arrow marked fixing bolt thread.
3. Idle pulley
-
Install idle pulley and tighten bolt to the specified torque.
Torque: 52 Nm (38 ft. lbs.)
4. Timing belt
-
Install timing belt.
5. Connect radiator inlet hose and replenish Engine Coolant (EC).
6. Connect battery ground cable.