Rodeo Sport 2WD V6-3.2L (2001)
9. Remove steering column cover.
10. Disconnect the wiring harness connectors located under the steering column then remove combination switch and SRS coil assembly.
Installation
1. Install combination switch and SRS coil assembly. After installation of combination switch assembly, connect the combination switch wiring
harness connector and the SRS 2-way connector located under the steering column. Then turn the SRS coil counter clockwise to full, return about
3 turns and align the neutral mark.
Caution:
When turning the SRS coil counter clockwise to full, stop turning if resistance is felL Forced further turning may damage to the cable in the
SRS coiL