Rodeo Sport 2WD V6-3.2L (2001)
Turn Signal Bulb: Service and Repair
Rear Turn Signal Light Bulb
REAR TURN SIGNAL BULB
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
-
Refer to the Taillight Bulb removal step.
3. Remove the bulb (1).
-
Remove the rear turn signal light socket by turning it counterclockwise. Remove the bulb by turning it counterclockwise while pushing it at the
same time.
INSTALLATION
To install, follow the removal steps in the reverse order.