Rodeo Sport 2WD V6-3.2L (2001)
Accelerator Pedal Position Sensor: Adjustments
Accelerator Position Sensor Adjustment
AP sensor is controlled three multiple control system, and adjust the idle position and WOT position are between A and B for AP sensor 1, AP sensor 2,
and AP sensor 3. Refer to "How to adjust for AP sensor".
How To Adjust For AP Sensor
1. Connect the Tech 2 to DLC on vehicle.
2. Ignition "ON," engine "OFF".
3. Display the APS date list. Check the following item for AP position (%).
4. If the problem was found, adjust as necessary.