Rodeo Sport 2WD V6-3.2L (2001)
![background image](/isuzu/rodeo_sport_2wd/v6-3.2l/Page-868002.png)
2. Install the two screws to the accelerator pedal assembly.
Tighten the screws to 22 N.m (16 lb.ft.).
3. Connect the electrical harness to the accelerator position sensor.
4. Install the negative battery cable.
2. Install the two screws to the accelerator pedal assembly.
Tighten the screws to 22 N.m (16 lb.ft.).
3. Connect the electrical harness to the accelerator position sensor.
4. Install the negative battery cable.