Rodeo Sport 2WD V6-3.2L (2001)
back out through the mount.
19. Install the driver side reinforcement bracket using the new hardware provided in the bracket kit. The required parts will vary depending on vehicle
model year and frame design. Use Figures 26, 27, and 28 for reference to correctly install the driver side bracket.
20. Torque bolts in the sequence and to the specifications shown in Figure 29.
21. Lower the vehicle to the ground and Torque both rear trailing link front mount mounting bolts to specification. Torque to 165 to 180 Nm (122-133
lbf ft.).
22. Apply the campaign label (see "Applying the Campaign Label on page 20 of this bulletin).
Condition Four: Reinforcement Bracket Type "B" Installation