Rodeo Sport 4WD V6-3.2L (2002)
3.
Use a plastic hammer to remove the door check arm pin. Pin will be reused for assembly (Figure 1).
NOTE:
Gently tap the pin upward (be careful not to loose the pin, as it will be reused).
4.
Pull the door check arm out of the check arm bracket.
5.
Identify current bushing and refer to matrix to determine appropriate repair procedure (white plastic bushing, gold colored metal bushing, or check
arm with no bushing) (Figure 2).
6.
Before installing the new bushing, apply molybdenum grease, or equivalent liberally to the door check arm, top and bottom of bushing, and
bushing pinhole (figure 3).
IMPORTANT:
Grease application is critical for proper operation.
NOTE:
