Rodeo Sport 4WD V6-3.2L (2002)
8. Remove the guide holders.
9. Remove the side hinges.
-
Remove the one fixing nut at each side hinge.
10. Remove the center hinge.
-
Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Tighten the center hinge fixing bolts to the specified torque.
Torque: 39 N.m (29 lb ft)
2. Tighten the side hinge fixing nuts to the specified torque.
Torque: 29 N.m (22 lb ft)
3. Tighten the side lock striker fixing bolts to the specified torque.
Torque: 19 N.m (14 lb ft)