Rodeo Sport 4WD V6-3.2L (2002)
Fuel Pressure Release: Vehicle Damage Warnings
Fuel Pressure Relief Procedure
CAUTION:
-
To reduce the risk of fire and personal injury, there are necessary to relieve the fuel system pressure before filler and gauge unit servicing the fuel
system components.
-
After relieving the system pressure, a small amount of fuel may be released when servicing fuel lines or connections. Reduce the chance of
personal injury by covering the fuel line fittings with a shop towel before you disconnect the fittings. The towels will absorb any fuel that may leak
out. When the disconnect is completed, place the towel in an approved container.
1. Remove the fuel cap.
2. Remove the fuel pump relay from the underhood relay box. Refer to Fuel Pump Relay in this section.
3. Start the engine and allow it to stall.
4. Crank the engine for 30 seconds.
5. Disconnect the negative battery cable.