Stylus L4-1588cc 1.6L DOHC (4XE1-W) (1991)
Brake Pedal Assy: Adjustments
Fig. 5 Adjusting brake pedal.
Measure the brake pedal height after making sure the pedal is fully released by the pedal return spring. Measure pedal height as shown in Fig. 5,
dimension ``L.'' Measurement should be 6.22 inches. If measurement is not as specified, proceed as follows:
1.
Loosen the stop lamp switch.
2.
Loosen locknut on the pushrod.
3.
Adjust the pushrod to the specified pedal height.
4.
Tighten locknut.