Trooper (2 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
Air Bag(s) Arming and Disarming: Service Precautions
CAUTION: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a replacement after removal. ISUZU will also call out the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (Paints, greases, or other corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and
CAUTION: When fasteners are removed, always reinstall them at the same location from which they were removed. if a fastener needs to be replaced,
use the correct part number fastener for that application. if the correct part number fastener is not available, a fastener of equal size and strength (or
stronger) may be used. fasteners that are not reused, and those requiring thread locking compound will be called out. the correct torque value must be
used when installing fasteners that require it. if the above conditions are not followed, parts or system damage could result.