Trooper II L4-2559cc 2.6L SOHC (4ZE1) (1989)
Fluid - Transfer Case: Testing and Inspection
INSPECTION OF TRANSMISSION FLUID LEVEL
Set parking brake.
With the engine idling, move the shift lever through all positions from "P" to "L", then return to position "P".
Check to see if the level of fluid comes to "HOT" range on the dipstick gauge.
If the level of fluid is too low, replenish to bring it to maximum level in "HOT" range.
INSPECTION OF TRANSFER CHAIN CASE FLUID LEVEL
With the engine OFF, remove the filler plug and feel inside the hole with your finger. The fluid should come to the bottom edge of the hole. If the
level is OK, reinstall the plug and tighten it.
If the level is low, add DEXRON II automatic transmission fluid until it begins to run out of the filler hole. Reinstall the filler plug securely.
NOTE: Make sure the vehicle is level when making this check.
INSPECTION OF FLUID CONDITION
If the ATF is black or smells burnt, replace it.