Trooper LS V6-3.5L (1998)
Drink Holders: Customer Interest
Interior - Rear Cup Holder Won't Stay Up/Falls Down
TSB SB02-11-S003
Trooper (UX) Rear Cup Holder Does Not Stay in the "UP" Position
ISSUE DATE: MAY, 2002
Affected Vehicles
1998-2002 Trooper (UX) equipped with rear seat cup holder.
Service Information
Condition:
Some customers may experience the rear cup holder not staying in the up position (closed position) or falling down (open position) when driving over a
bump.
Possible Cause:
Poor fit between the magnet and the retaining plate.
Correction:
Follow the procedure in this bulletin to add a spacer behind the retaining magnet for a more secure fit.
NOTE:
It is not necessary to replace the existing cup holder assembly to repair this condition.
Service Procedure
1.
With cup holder in the down position, remove the two screws holding the plastic retaining piece in place (Figure 1).
2.
Remove the cup holder tray from the assembly.
