isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Speakers - Static Noise When Adjusting Mirrors|Page 6118 > < Speakers - Static Noise When Adjusting Mirrors|Page 6112
Page 1
background image

Power Mirror Motor: Customer Interest
Speakers - Static Noise When Adjusting Mirrors

BULLETIN NUMBER:
SB00-11-S002

ISSUE DATE:
APRIL 2000

GROUP:
BODY

1998-99 TROOPER (UX): NOISE IN RADIO SPEAKERS WHEN ADJUSTING MIRRORS

AFFECTED VEHICLES

1998-99 Trooper models

SERVICE INFORMATION

Condition:

Some owners may comment of static noise in the door radio speaker when adjusting the outside rear view mirrors.

Possible Cause:

Radio frequency interference when the power mirror motor is activated.

Correction:

To correct this condition install a radio noise filter for each of the front door mirror motors.

SERVICE PROCEDURE

1.

Remove the plastic cover (by pulling cover away from door) from the door and disconnect the speaker wire connector (if equipped) as described in
the appropriate Workshop Manual (figure 1).

2.

Remove the three bolts while holding outside rear view mirror assembly (figure 1).

Speakers - Static Noise When Adjusting Mirrors|Page 6118 > < Speakers - Static Noise When Adjusting Mirrors|Page 6112