Trooper LS V6-3.5L (1998)
2.
Adjust the length of the clasp by turning the clasp. (Figure 2)
^
Turn the clasp clockwise to tighten the latching tension.
^
Turn the clasp counter-clockwise to loosen the latching tension.
IMPORTANT
Do not over-tighten the clasp. Excessive latching tension may damage the latch and/or the spare tire cover.
3.
Tighten the clasp until slight tension may be felt on the latch handle beginning from the 7 o'clock position when latching. (Figure 3)
4.
After the clasp is adjusted to obtain the correct latching tension, retighten the lock-nut of the latch using the 8mm wrench. (Figure 4)