Trooper LS V6-3.5L (1998)
5. Remove lock bolt (2).
6. Remove guide bolt (3).
7. Remove caliper assembly.
8. Remove support bracket with pad assembly and take care not to damage the flexible brake hose when removing the support bracket.
9. Remove pad assembly (with shim) and mark the lining locations if they are to be reinstalled.
10. Remove clip.
INSTALLATION
1. Install clip (4).
2. Install pad assembly (with shim) and apply special grease (approximately 0.2 g) to both contacting surfaces of the inner shims (5). Wipe off
extruded grease after installing.
