Trooper LS V6-3.5L (1998)
Vacuum Brake Booster: Service and Repair
Exterior Components
REMOVAL
1. Remove master cylinder.
2. Remove vacuum booster.
3. Remove yoke clevis.
4. Remove lock nut.
5. Remove retaining clip.
6. Remove valve body guard.
7. Remove silencer.
8. Remove filter.
9. Remove 2 gaskets and spacer.
10. Remove retainer, use a small screwdriver to pry out the retainer. Gently pull out the plate and seal assembly from the shell.
11. Remove plate and seal assembly.
INSPECTION AND REPAIR
Visual Check
Make necessary parts replacement if cuts, nicks excessive wear, or other abnormal conditions are fount through inspection. Check the following parts:
^
Yoke clevis
^
Valve body guard
