Trooper LS V6-3.5L (1998)
2. Install camshaft assembly and camshaft brackets (2), tighten twenty bolts (1) on one side bank to the specified torque.
Torque: 10 Nm (89 inch lbs.)
3. Measure the camshaft thrust clearance with a dial indicator. Replace the camshaft and/or the cylinder head if the camshaft thrust clearance
exceeds the specified limit.
Camshaft thrust Clearance:
Standard: 0.03 mm - 0.08 mm (0.0012 inch - 0.0031 inch)
Limit: 0.12 mm (0.0047 mm)
REASSEMBLY
1. Install camshaft drive gear assembly and tighten three bolts to specified torque.
Torque: 10 Nm (89 inch lbs.)
2. Tighten sub gear setting bolt.
1. Use J-42686 to turn sub gear to right direction until the M5 bolt hole aligns between camshaft driven gear and sub gear.