Trooper LS V6-3.5L (1998)
-
The crankcase must be installed within 5 minutes after sealant application before the sealant hardens.
3. Install crankcase, tighten crankcase fixing bolts to the specified torque.
Torque: 10 Nm (89 inch lbs.)
2. Install oil pan
1. Remove residual sealant, lubricant and moisture from mounting surface, then dry thoroughly.
2. Properly apply a 4.5 mm (07 inch) wide bead of sealant (TB-1207C or equivalent) to mounting surface of oil pan.
Sealant beat must be continuous.
-
The crankcase must be installed within 5 minutes after sealant application before the sealant hardens.
3. Install oil pan, tighten oil pan fixing bolts to the specified torque.
Torque: 25 Nm (18 ft. lbs.)