isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Leak Check - Repair of Refrigerant Leaks|Page 5532 > < Leak Check - Repair of Refrigerant Leaks|Page 5530
Page 19
background image

1. Connect the high and low charging hoses of the ACR4 (or equivalent) as shown in the image.
2. Recover the refrigerant by following the Manufacturer's Instructions.
3. When a part is removed, put a cap or a plug on the connecting portion so that dust, dirt or moisture cannot get into it.

Refrigerant Recycling

Recycle the refrigerant recovered by J-39500 (ACR4: HFC-134a Refrigerant Recovery/Recycling/Recharging/System) or equivalent.

For the details of the actual operation, follow the steps in the ACR4 (or equivalent) Manufacturer's Instructions.

Evacuation of the Refrigerant System

NOTE:  Explained below is a method using a vacuum pump. Refer to the ACR4 (or equivalent) manufacturer's instructions when evacuating the system
with a ACR4 (or equivalent).

Air and moisture in the refrigerant will cause problems in the air conditioning system. Therefore, before charging the refrigerant, be sure to evacuate air
and moisture thoroughly from the system.

Leak Check - Repair of Refrigerant Leaks|Page 5532 > < Leak Check - Repair of Refrigerant Leaks|Page 5530