Trooper LS V6-3.5L (1998)
Fuel Tank Unit: Service and Repair
REMOVAL
CAUTION:When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage.
1. Disconnect battery ground cable.
2. Loosen fuel filler cap.
3. Drain fuel.
Tighten drain plug to the specified torque after draining fuel.
Torque:20 .m (14 lb ft) - M8
4. Wiring connector
^
Disconnect wiring connector (1) from the unit.
5. Fuel gauge unit
^
Remove the fixing screws, then the fuel gauge unit (2).
NOTE:After removing fuel gauge unit, cover fuel tank to prevent any dust entering
INSTALLATION
1. Fuel gauge unit (2).
2. Wiring connector (1).
^
Connect the wiring connector to the fuel gauge unit.
^
Fill the tank with fuel and tighten fuel filler cap.
^
Connect battery ground cable.