Trooper LS V6-3.5L (1998)
NOTE:
1. For those connectors on which specific terminal numbers or symbols are shown (such as PCM), the terminal numbers or symbols are used in the
circuit diagram, irrespective of the above rule. Refer to the figure.
2. The connectors used for relays have their own terminal number assignment, irrespective of the above rule. Refer to the figure.
Double Lock Type Connector
Double lock type yellow color connectors are used for supplemental restraint system-air bag circuit. When removing the cable harness, disconnect the
connector by unlocking at two places, outside (1) and inside (2). In such a case, do not pull the cables. Otherwise, cable disconnection may occur.
When connecting the connector, insert the connector completely and lock at outside. Imperfect locking may cause malfunction of SRS system circuit.
Parts For Electrical Circuit
Wiring - Wire color
All wires have color-coded insulation.
Wires belonging to a system's main harness will have a single color (1). Wires belonging to a system's subcircuits will have a colored stripe (2). Striped
wires use the code shown in the figure to show wire size and colors.
