Trooper LS V6-3.5L (1998)
NOTE: Pass the lead wire through the tabs on the plastic cover (wire protector) or inflator to prevent lead wire from being pinched.
11. Secure the inflator module with one bolt to relieve weight on the wire connector.
12. Tighten fixing bolts to specified sequence as illustrated.
Torque: 8 Nm (69 inch lbs.)
13. Install steering lower cover, then install the engine hood opening lever.
14. Install lower cluster assembly.
15. Connect the wiring harness connectors, then install front console assembly and install the transmission (for M/T) and transfer control lever knob.
16. Connect the yellow 2-way SRS connector located under the steering column.
17. Connect the battery "-" terminal cable.
SYSTEM INSPECTION
Turn the ignition switch to "ON" while watching warning light. The light should flash 7 times and then go off.
