Trooper LS V6-3.5L (1998)
Continuity of Contacts
With the plunger faced downward, push down the magnetic switch. In this state, check for continuity between terminals B and M. Replace, if there is no
continuity (i.e., contacts are faulty).
Pinion
Check if the pinion rotates smoothly in drive direction by hand, or if it is locked when it is rotated in reverse. If not, replace the pinion.
Yoke Assembly
Check a magnet inside the yoke.
Replace the yoke assembly if it is broken.
Ball Bearing
Clamp the inner race of the ball bearing with your finger, and check for sticking or play when rotating the outer race.
Replace, if abnormality is found.