Trooper LS V6-3.5L (1998)
1. To adjust the toe-in angle, loosen the lock nuts (2) on the outer track rods (1) and turn the outer track rods.
Turn both rods the same amount, to keep the steering wheel centered.
Toe-in: 0 ± 2 mm (0 ± 0.08 inch)
2. Tighten the lock nut to the specified torque.
Torque: 118 Nm (87 ft. lbs.)
Trim Height
Adjust the trim height (1) by means of the adjusting bolt on the height control arms.
CAUTION: When adjusting front end alignment, be sure to begin with trim height first, as it may change other adjusted alignments.
1. Check and adjust the tire inflation pressures.
2. Park the vehicle on a level ground and move the front of the vehicle up and down several times to settle the suspension.
3. Make necessary adjustment with the adjusting bolt on the height control arms.
Trim height: 129 mm (5.08 inch)
