Trooper LS V6-3.5L (1998)
10. Remove lower ball joint by using remover J-29107.
CAUTION: Be careful not to damage the ball joint boot.
11. Remove upper ball joint by using remover J-36831.
CAUTION: Be careful not to damage the ball joint boot.
12. Remove knuckle assembly.
13. Remove oil seal.
14. Remove washer.
15. Remove needle bearing by using remover J-23907.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal conditions are found through inspection. Check the
following parts:
-
Knuckle
-
Knuckle arm
-
Needle bearing
-
Thrust washer
INSTALLATION
