Trooper LS V6-3.5L (1998)
7. Make a setting mark (1) across the coupling flange and worm shaft to ensure reassembly of the parts in the original position, then remove universal
joint bolt.
8. Push the stabilizer bar aside and remove the gear box mounting bolts and nuts.
9. Remove gear box.
INSTALLATION
1. Align the setting marks (1) made at removal, then install gear box.
2. Tighten gear box mounting bolt and nut to specified torque.
Torque: 44 Nm (33 ft. lbs.)
3. Tighten gear universal joint bolt to specified torque.
Torque: 25 Nm (18 ft. lbs.)
