Trooper LS V6-3.5L (1998)
11. Turn the SRS coil counterclockwise to full, return about 3 turns and align the neutral mark (1).
CAUTION: When turning the SRS coil counterclockwise to full, stop turning if resistance Is felt. Forced further turning may damage to the cable
in the SRS coil.
12. Install steering column cover.
CAUTION: When installing the steering column cover, be sure to wire (through each harness) as Illustrated so that the harness starter switch,
combination switch and SRS coil may not catch wiring.
13. Install the steering wheel and align the setting marks.
14. Tighten the steering wheel fixing nut to the specified torque.
Torque: 34 N.m (25 lb ft)
15. Connect horn lead.
