Specifications for Trooper LS V6-35L (1998) Lateral Stabilizer Rod on Page 5199
1. Install lateral rod and make sure that the lateral rod is in its correct position.
NOTE: When mounting lateral rod, be sure not to use grease on bushings or any other nearby part.
2. Install bolt and nut. Tighten the bolt and nut lightly, then retighten them to the specified torque after the vehicle is at curb height.
Torque: 137 Nm (101 ft. lbs.)
3. Install nut and washer. Tighten the nut lightly, then retighten the nut to the specified torque after the vehicle is at curb height.
Torque: 78 Nm (58 ft. lbs.)
