isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

A/T - 4L30E Accumulator Piston Cover Fluid Leak|Page 3184 > < Shift Interlock Solenoid|Locations
Page 1
background image

Accumulator: All Technical Service Bulletins
A/T - 4L30E Accumulator Piston Cover Fluid Leak

BULLETIN NUMBER:
SB02-05-S002

ISSUE DATE:
NOVEMBER 2002

GROUP:
TRANSMISSION

4L30E ACCUMULATOR PISTON COVER LEAKAGE

AFFECTED VEHICLES

All Isuzu models equipped with the 4L30E automatic transmission.

SERVICE INFORMATION

Condition:

Some vehicles may experience a transmission fluid leak at the Accumulator Piston Cover.

Possible Cause:

The leak may be due to poor sealing of the accumulator piston cover.

Correction:

To repair this condition, install a new Accumulator Piston Cover following the procedures in this bulletin.

SERVICE PROCEDURE

1.

Raise the vehicle using an appropriate lift and secure.

NOTE:

For 2001 and previous models disregard step 2 and proceed to step 3.

2.

2002-Current, loosen the bracket that secures the ATF cooler return line and disconnect the line from the transmission.

3.

Remove the accumulator piston cover snap ring using snap ring pliers (Figure 1). The snap ring should be retained for reinstallation.

A/T - 4L30E Accumulator Piston Cover Fluid Leak|Page 3184 > < Shift Interlock Solenoid|Locations