Trooper LS V6-3.5L (1998)
Shifter A/T: Service and Repair
INSPECTION
1. Make sure that when the shifter control lever is shifted from "P" to "L", a "clicking" can be felt at each shift position. Make sure that the gear
corresponds to that of the position plate indicator.
2. Check to see if the shifter lever can be shifted as shown in illustration.
REMOVAL
1. Disconnect battery ground cable.
2. Remove transfer control lever knob.
3. Remove front console.
-
Disconnect wiring harness connectors from front console.
4. Disconnect shift lock cable (1) from the selector lever assembly side.
5. Disconnect shift control rod (2) from the selector lever assembly side.
6. Disconnect wiring harness connectors from the selector lever assembly.
7. Remove selector lever assembly.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points:
Adjustment Of Select Lever And Control Rod
1. Place the vehicle on a level surface.
