Trooper LS V6-3.5L (1998)
2. Using the oil seal installer J-42804, attach the oil seal.
NOTE: When attaching the oil seal, pay attention to the direction.
3. Mount the rear companion flange, O-ring , washer, and nuts to the transfer in this order.
4. Using the flange holder J-8614-11, set the end nut.
Torque: 167 Nm (123 ft. lbs.)
5. Using the punch J-39209, stake the end nut at two places.
NOTE: Check the staked end nut is free from cracks.
6. Connect the rear propeller shaft to the transfer case and tighten to the specified torque.
Torque: 63 Nm 46 (ft. lbs.)
