Trooper LS 2WD V6-3.5L (2001)
Installation
1. Install the speed sensor and take care not to hit the speed sensor pole piece during installation.
2. Install the sensor fixing bolt and tighten it to the specified torque.
-
Torque: 18 Nm (13 ft. lbs.)
3. Install the sensor cable fixing bolt and tighten it to the specified torque.
-
Torque: 24 Nm (18 ft. lbs.)
Note: Confirm that the cable is not twisted when connecting the speed sensor cable.
4. Install clip.
5. Install speed sensor connector.