Trooper LS 2WD V6-3.5L (2001)
Evaporator Temperature Sensor / Switch: Service and Repair
Disassembled View
Electronic Thermostat, Evaporator Core and/or Expansion Valve
REMOVAL
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
3. Remove evaporator assembly. Refer to Evaporator Core.
4. Remove the electronic thermostat sensor fixing clip. Pull the sensor from the evaporator assembly.
5. Remove clip.
6. Remove attaching screw.
7. Remove upper case.
8. Remove lower case.
