Trooper LS 2WD V6-3.5L (2001)
Windshield Washer Switch: Service and Repair
Rear Wiper and Washer Switch
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front console assembly (1). Refer to Instrument Panel, Gauges and Warning Indicators.
3. Remove the lower cluster assembly (2). Refer to Instrument Panel, Gauges and Warning Indicators.
4. Remove the instrument panel driver lower cover (3). Refer to Instrument Panel, Gauges and Warning Indicators.
5. Remove the instrument panel cluster assembly (4). Refer to Instrument Panel, Gauges and Warning Indicators.
6. Disconnect the connector and push the lock from the back side of the instrument panel cluster assembly to remove the rear wiper & washer switch
(5).
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point:
1. Push the switch with your fingers until it locks securely.
