Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Cruise Control Switch: Service and Repair
Starter Switch
Preparation: Disconnect the battery ground cable.
1. Front console assembly
^ Remove four screws.
^ Remove the transmission shift lever knob.
^ Remove the transfer shift lever knob.
^ Disconnect the seat heater switch connectors (If so equipped).
^ Disconnect the "POWER & WINTER" switch connectors (A/T only).
2. Lower cluster assembly
^ Remove three screws.
^ Disconnect the cigarette lighter connectors.
^ Remove the cigarette lighter illumination bulb socket.
^ Disconnect the ashtray illumination bulb connector.
3. Instrument panel driver lower cover
^ Remove the engine hood opener.
^ Remove three screws and clip.
^ Disconnect four fasteners.
4. Steering cowl
^ Remove seven screws.
5. Starter switch
^ Disconnect the connector.
^ Remove the screw.
INSTALLATION
To install, follow the removal steps in the reverse order noting the following point.