Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
/Page-1696002.png)
a. Remove the rubber bushing (Axle side).
b. Install the rubber bushing (Axle side).
INSTALLATION
1. Lateral rod. Make sure that the lateral rod is in its correct position.
NOTE: When mounting lateral rod, be sure not to use grease on bushings or any other nearby part.
2. Bolt and nut. Tighten the bolt and nut lightly, and retighten to the specified torque after the vehicle is at curb height. Torque to 137 Nm (101 ft.
lbs.).
3. Nut and washer. Tighten the nut lightly, and retighten to the specified torque after the vehicle is at curb height. Torque to 78 Nm (58 ft. lbs.).
