Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
3. Torsion bar. Apply the setting marks to the torsion bar and lower control arm.
INSTALLATION
1. Torsion bar as follows:
a. Make sure the bars are on their correct respective sides.
b. Apply grease to the serrated portions.
c. Align the setting marks.
2. Height control arm as follows:
a. Apply grease to the portion that fits into the bracket.
b. Align the setting marks.
c. Apply grease to the bolt portion of the end piece.