Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
1. Piston (4)
-
The lip of the seals must point toward the front of the transmission. Lubricate the lip seal with transmission fluid.
-
Install piston assembly into the third clutch drum. Use installer to protect the outer seal during installation.
Third clutch piston installer: J-23084 or equivalent
2. Springs (3)
3. Spring seat (2)
4. Retaining ring (1)
-
Place retaining ring onto spring seat.
-
Compress the piston springs, using the piston spring compressor.
CAUTION: Do not over-stress the springs and seat. Do not let the spring seat catch in the ring groove. This may cause damage to the spring
seat.
^
Install spring seat retaining ring.
^
Remove the piston spring compressor.
Spring compressor: J-23075 or equivalent
Adapter: J-23075-12 or equivalent