Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
1. Turbine shaft seal rings (15)
-
Install seals with grease (petroleum jelly).
2. Overrun clutch drum (14)
3. Piston (13)
-
Install the inner installer on the drum.
-
Pre-install piston into outer installer.
-
Install overrun clutch piston assembly. Use the outer installer J-38555 or equivalent, while pushing piston into drum.
4. Diaphragm spring (12)
5. Overrun clutch release spring retainer (11)
6. Roller clutch assembly (10)
7. Overrun roller clutch cam (9)
8. Snap ring (8)
-
Place snap ring loosely on spring retainer.
-
Hold the compressor in a vise.
-
Compress piston return spring with compressor J-23327-91 or equivalent.