Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Powertrain Control Module (PCM): Service and Repair
REMOVAL
Preparation: Disconnect negative (-) battery cable.
1. Front console
2. Wiring harness connector
-
Disconnect Powertrain Control Module (PCM) wiring harness connectors from PCM.
3. PCM
-
Remove two PCM retaining screws.
-
Remove two brackets from PCM.
INSTALLATION
To install, follow the removal steps in the reverse order.
1. Powertrain Control Module (PCM)
-
Install two brackets to PCM.
-
Install two PCM retaining screws.
2. Wiring harness connector
-
Connect PCM wiring harness connectors to PCM.
3. Front console
-
Connect negative (-) battery cable.