Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Check and see that there is not wear damage, or cracking in the sleeve.
NOTE: Close inspection of the groove and inner gear are required because those are important parts.
Functional Check
Operate the sleeve with the inner shaft combined with the clutch gear. If roughness is felt, replace the sleeve.
NOTE: Gear oil should be applied to the contact surface of gear.
Dimensional Check
-
Check the width of sleeve center groove.
Limit: 7.1 mm (0.28 inch).
CLUTCH GEAR
Visual Check
-
Check and see that there is not wear, damage, crack, or any other abnormality in the clutch gear.
Functional Check
-
If there is an abnormality such as roughness when operated in combination with sleeve, replace the clutch gear.
NOTE: When inspecting, gear oil should be applied to the contact surface of gear.
Dimensional Inspection
-
Make sure of the size illustrated.